SUPPORT

Sodium Chlorate - Names and Identifiers
Name：Sodium Chlorate

Synonyms： Natriumchlorat
Sodium Chlorate
chlorate de sodium
Sodium chlorate (industrial)

CAS：7775-09-9

EINECS：231-887-4

InChI：InChI=1/ClHO3.Na/c2-1(3)4;/h(H,2,3,4);/q;+1/p-1

Sodium Chlorate - Physico-chemical Properties
Molecular Formula：NaClO3

Molar Mass：106.441

Melting Point：248-261℃

Water Solubility：1000 g/L (20℃)

Physical and Chemical Properties：Characteristics of colorless or white cubic crystal system. The taste was salty and cool.
melting point 255 ℃
relative density 2.490
solubility soluble in water, soluble in ethanol, liquid ammonia, glycerol.

Polyacrylamide emulsion is prepared by dispersion or reverse phase emulsion polymerization, and is a form of polyacrylamide liquid. It has the characteristics of solid flocculant, and absorbs the solid particles suspended in water through the polar groups in the molecular chain, so that the bridge or electric neutralization between the particles forms a large flocculant.

Is a broad range of bactericidal preservatives, can effectively kill algae, bacteria and fungi. The active single agent can be widely used in industrial cooling water, oil field back tank water, paper industry, pipeline, paint, paint, rubber and cosmetics, photographic film and washing products and other industries.

Isothiazolone has good efficacy in killing and stripping fungi, bacteria, algae, mollusks and slime. In the use of content, can be naturally degraded into non-toxic substances, the environment does not produce pollution.

Iron(III) chloride - Physico-chemical Properties
Molecular Formula：Fecl3

Molar Mass：162.2

Density：2,804 g/cm3

Melting Point：304°C(lit.)

Boling Point：316 °C

Flash Point：316°C

Water Solubility：920 g/L (20 ºC)

Solubility：H2O: soluble

Vapor Presure：1 mm Hg ( 194 °C)

Vapor Density：5.61 (vs air)

Appearance：powder

Specific Gravity：2.804

Color：Yellow

Exposure Limit：ACGIH: TWA 1 mg/m3NIOSH: TWA 1 mg/m3

Merck：14,4019

PH：1 (200g/l, H2O, 20℃)

Storage Condition：Store below +30°C.

Stability：Stable. Very sensitive to moisture. Incompatible with strong oxidizing agents; forms explosive mixtures with sodium, potassium. Hygroscopic.

Sensitive：Hygroscopic

Refractive Index：n20/D1.414

Physical and Chemical Properties：Character black-brown hexagonal crystal. In the transmission of light in the pomegranate red, reflected light under the metal Green.
melting point 306 ℃
relative density 2.898

Polymerized ferric sulfate is an inorganic polymer coagulant with superior performance. The liquid is brown, and the solid is a light yellow amorphous powdery solid. It is easily soluble in water. The 10% (mass) aqueous solution is a reddish brown transparent solution. Solid products are highly hygroscopic. Polyferric sulfate is widely used in the purification treatment of drinking water, industrial water, various industrial wastewater, urban sewage, sludge dehydration, etc.

Poly aluminum chloride is a water purification material, inorganic polymer coagulant, also referred to as Poly aluminum, abbreviated as PAC, an inorganic polymer water treatment agent having a relatively large molecular weight and a relatively high charge is produced due to bridging action of hydroxide ions and polymerization of polyvalent anions.